Cruise Main Indicator Light Circuit: Procedure
- PERFORM ACTIVE TEST USING TECHSTREAM (CRUISE CONTROL INDICATOR LIGHT)
- Select the Active Test, use the Techstream to generate a control command, and then check that the cruise control indicator light illuminates. Refer to DATA LIST / ACTIVE TEST [09/2012 - ]
.COMBINATION METER
Tester Display Test Part Control Range Diagnostic Note Indic. Lamp Cruise Cruise control indicator light ON / OFF - OK
Cruise control indicator light turns ON/OFF.
NG → See step 3
OK: Go to next step
- Select the Active Test, use the Techstream to generate a control command, and then check that the cruise control indicator light illuminates. Refer to DATA LIST / ACTIVE TEST [09/2012 - ]
.
- READ VALUE USING TECHSTREAM (CRUISE CONTROL INDICATOR LIGHT)
- Check the Data List for proper functioning of the cruise control indicator light. Refer to DATA LIST / ACTIVE TEST [09/2012 - ]
.CRUISE CONTROL
Tester Display Measurement Item/Range Normal Condition Diagnostic Note CCS Indicator M-CPU Cruise control indicator (Main CPU) / ON or OFF ON: Cruise control indicator light is ON
OFF: Cruise control indicator light is OFF- OK
When the cruise control main switch operation is performed, the result will be the same as above.
NG → See step 5
OK → See step 4
- Check the Data List for proper functioning of the cruise control indicator light. Refer to DATA LIST / ACTIVE TEST [09/2012 - ]
.
- GO TO METER / GAUGE SYSTEM. Refer to PROBLEM SYMPTOMS TABLE [09/2012 - ]
- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE. Refer to PROBLEM SYMPTOMS TABLE [09/2012 - ]
- REPLACE ECM. Refer to REMOVAL [09/2012 - ]