Mike's Workshop Manuals
: Service manuals for every vehicle
Home
>>
Lexus
>>
2013
>>
IS 350C Base
>>
Repair and Diagnosis
>>
External Pages
>>
Different car
>>
Section 12 (Engine Control System (Diagnostic Codes (P0190-P0630)))
>>
SFI System
>>
DTC P062F: Internal Control Module EEPROM Error
>>
Typical Enabling Conditions
Typical Enabling Conditions
WARNING:
This page is about a different car, the 2013 Lexus IS 250C. However, it is still accessible from the selected car via links, so may be relevant.
Monitor runs whenever following DTCs are not present
None
Time after engine start
10 seconds or more
Battery voltage
8 V or more
Engine switch
On (IG)
Starter
Off