Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2013 >> IS 250C Base >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Dynamic Radar Cruise Control System (Diagnostic Codes & Circuit Tests) >> Dynamic Radar Cruise Control System >> Circuit Tests >> Wiper Signal Circuit >> Procedure

Wiper Signal Circuit: Procedure

  1. INSPECT WIPER AND WASHER SYSTEM 

    Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2012 - ] .

    OK

    Wiper function is normal.

    NG → See step   3 

    OK → See step   2 

  2. PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE. Refer to  PROBLEM SYMPTOMS TABLE [08/2012 - ] 
  3. GO TO WIPER AND WASHER SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2012 - ] 
scientia non olet · About Mike's Workshop Manuals