Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2013 >> GX 460 Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Stability Control System (Diagnostic Codes & Symptom Tests) >> Vehicle Stability Control System >> DTC C1380: Stop Light Control Relay Malfunction >> Inspection Procedure

Inspection Procedure

NOTE:
  • When replacing the master cylinder solenoid, perform calibration. Refer to CALIBRATION [06/2012 - ] .
  • Inspect the fuses for circuits related to this system before performing the following inspection procedure.

HINT: 

When DTC C1425 is output together with DTC C1380, inspect and repair the trouble areas indicated by DTC C1425 first. Refer to DTC C1425: Open in Stop Light Switch Circuit .

scientia non olet · About Mike's Workshop Manuals