DTC 43: ABS Control System Malfunction: Procedure
- CHECK ANTI-LOCK BRAKE SYSTEM
- Clear the DTCs. Refer to DTC CHECK / CLEAR [06/2012 - ] .
- Turn the engine switch off.
- Check if an ABS DTC is output. Refer to DTC CHECK / CLEAR [06/2012 - ]
.RESULT
Result Proceed to DTC (ABS DTC) is not output A DTC (ABS DTC) is output B
B → See step 4
A: Go to next step
- CONFIRM DTC
- Clear the DTCs. Refer to DTC CHECK / CLEAR [06/2012 - ] .
- Turn the engine switch off.
- Check if the same DTC is output. Refer to DTC CHECK / CLEAR [06/2012 - ]
.RESULT
Result Proceed to DTC is not output A DTC is output B
B → See step 5
A → See step 3
- USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2012 - ]
- REPAIR CIRCUITS INDICATED BY OUTPUT DTCS. Refer to DIAGNOSTIC TROUBLE CODE CHART [06/2012 - ]
- REPLACE MASTER CYLINDER SOLENOID. Refer to DISASSEMBLY [06/2012 - ]