All Power Windows do not Operate with Driver Side Door Key Cylinder or Wireless Transmitter: Procedure
- CHECK BASIC FUNCTION (WIRELESS AND POWER DOOR LOCK CONTROL SYSTEM)
- Check that the wireless transmitter and driver door key cylinder (key-linked switch) lock and unlock all the doors normally. Refer to OPERATION CHECK [06/2012 - ]
.RESULT
Result Proceed to Transmitter and driver door key cylinder operate normally A Transmitter does not operate normally B Driver door key cylinder does not operate normally C
B → See step 4
C → See step 5
A: Go to next step
- Check that the wireless transmitter and driver door key cylinder (key-linked switch) lock and unlock all the doors normally. Refer to OPERATION CHECK [06/2012 - ]
.
- CHECK MANUAL UP/DOWN FUNCTION
- Check that the manual up/down function using the multiplex network master switches and power window regulator switch can operate all the power windows. Refer to OPERATION CHECK [06/2012 - ]
.
OK
Manual up/down function is normal.
NG → See step 6
OK: Go to next step
- Check that the manual up/down function using the multiplex network master switches and power window regulator switch can operate all the power windows. Refer to OPERATION CHECK [06/2012 - ]
.
- CHECK REMOTE UP/DOWN FUNCTION
- Check that the remote up/down function using the multiplex network master switch operates the power windows. Refer to OPERATION CHECK [06/2012 - ]
.
OK
Remote up/down function is normal.
NG → See step 6
OK → See step 7
- Check that the remote up/down function using the multiplex network master switch operates the power windows. Refer to OPERATION CHECK [06/2012 - ]
.
- GO TO WIRELESS DOOR LOCK CONTROL SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2012 - ]
- GO TO POWER DOOR LOCK CONTROL SYSTEM. Refer to PROBLEM SYMPTOMS TABLE [06/2012 - ]
- GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table). Refer to PROBLEM SYMPTOMS TABLE [06/2012 - ]
- REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU). Refer to REMOVAL [06/2012 - ]