DTC C1409: Front Speed Sensor RH Performance; DTC C1410: Front Speed Sensor LH Performance: Procedure

1. Clear the DTCs. Refer to DTC CHECK / CLEAR [12/2011 - ] .
2. Turn the engine switch off.
3. Start the engine.
4. Perform a road test.
5. Check if the same DTC is output. Refer to DTC CHECK / CLEAR [12/2011 - ] .
   RESULT
   
   

   Result	Proceed to
   DTCs C1409 and C1410 are not output	A
   DTCs C1409 and/or C1410 are output (for 2WD)	B
   DTCs C1409 and/or C1410 are output (for AWD)	C

   NOTE:

   Check the speed sensor signal after replacement. Refer to TEST MODE PROCEDURE [12/2011 - ] .

B → See step   3 

C → See step   2 

A → See step   4