Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2013 >> GS 350 Base, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Stability Control System (Diagnostic Codes & Symptom Tests) >> Vehicle Stability Control System >> DTC C1380: Stop Light Control Relay Malfunction >> Inspection Procedure

Inspection Procedure

NOTE:
  • When replacing the brake actuator assembly, perform zero point calibration and store system information. Refer to CALIBRATION [12/2011 - ] .
  • Inspect the fuses for circuits related to this system before performing the following inspection procedure.

HINT: 

When DTC C1425 and/or C1426 is output together with DTC C1380, inspect and repair the trouble areas indicated by DTC C1425 and/or C1426 first. Refer to DTC C1425: Open in Stop Light Switch Circuit , or. Refer to DTC C1426: Stop Light Switch OFF Stuck Malfunction ).

scientia non olet · About Mike's Workshop Manuals