Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2012 >> IS F >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System (Service Information) >> Cruise Control Main Switch >> Removal >> Removal

Cruise Control Main Switch: Removal: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    WARNING:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system. Refer to PRECAUTION .

    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Refer to INITIALIZATION .

  2. REMOVE LOWER NO. 2 STEERING WHEEL COVER  . Refer to REMOVAL - Step 4
  3. REMOVE LOWER NO. 3 STEERING WHEEL COVER  . Refer to REMOVAL - Step 3
  4. REMOVE STEERING PAD  . Refer to REMOVAL - Step 5
  5. REMOVE CRUISE CONTROL MAIN SWITCH 
    1. Disconnect the connector.
    2. Remove the 2 screws and the cruise control main switch.
      Fig 1: Location of Cruise Control Main Switch Screws
      GTY150679Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals