Purge Valve: Installation: Installation

WARNING: This page is about a different car, the 2012 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL PURGE VSV
1. Install the purge VSV with the bolt.
  
  Fig 1: Installing Vacuum Switching Valve (EVAP VSV)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 18 N*m (182 kgf*cm, 13 ft.*lbf)
2. Connect the 2 hoses.
3. Connect the connector.
INSTALL V-BANK COVER SUB-ASSEMBLY . Refer to INSTALLATION - Step 115