Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2012 >> IS 250C Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel System (4GR-FSE) (Service Information) >> Fuel Pressure Regulator >> Installation >> Installation

Fuel Pressure Regulator: Installation: Installation

  1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY 
    1. Apply a light coat of gasoline to 2 new O-rings, and install them to the fuel pressure regulator.
      Fig 1: Remove the 2 O-rings
      GTY274285Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *1 O-ring
    2. Install the fuel pressure regulator to the fuel relief valve.
      Fig 2: View Of Installing The Fuel Pressure Regulator To The Fuel Relief Valve
      GTY278343Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *1 Clip
      *2 O-ring
  2. INSTALL JET PUMP  See step  1
  3. INSTALL FUEL RELIEF VALVE ASSEMBLY  See step  2
  4. INSTALL FLANGE ASSEMBLY  See step  3
  5. INSTALL FUEL PUMP  See step  4
  6. INSTALL NO. 1 FUEL SUB-TANK  See step  5
  7. INSTALL FUEL SENDER GAUGE  See step  2
  8. INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE 
    1. Install the fuel suction tube assembly with pump and gauge. Refer to INSTALLATION .
scientia non olet · About Mike's Workshop Manuals