DTC P0575: Cruise Control Input Circuit: Procedure

1. Clear the DTCs. Refer to DTC CHECK / CLEAR .
2. Perform the following to make sure that the DTC detection conditions are met.

   HINT: 

   If the detection conditions are not met, the malfunction cannot be detected.

   1. Drive the vehicle at a speed for which cruise control operation is possible.
   2. Turn the cruise control main switch (ON-OFF button) on.
   3. Push the -SET switch to activate the cruise control.
3. Check the DTCs. Refer to DTC CHECK / CLEAR .

   Result

   Result	Proceed to
   DTC is not output	A
   DTC P0575 is output (for 2GR-FSE)	B
   DTC P0575 is output (for 4GR-FSE)	C

B → See step   3 

C → See step   4 

A → See step   2