DTC P2610: ECM/PCM Internal Engine Off Timer Performance: Procedure

1. Replace the hybrid vehicle control ECU. Refer to REMOVAL .

NEXT: Go to next step 

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Clear the DTCs. Refer to DTC CHECK/CLEAR .
5. Drive the vehicle in accordance with the driving pattern described in Confirmation Driving Pattern.
6. Enter the following menus: Powertrain/Engine and ECT/Trouble Codes/Pending.
7. If no pending DTC is displayed, the repair has been successfully completed.

NEXT → END