Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2011 >> LS 600hL >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Dynamic Radar Cruise Control System (Diagnostics - Introduction) >> Dynamic Radar Cruise Control System >> DTC Check / Clear >> DTC Check / Clear

DTC Check / Clear

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch ON (IG).
    3. Turn the Techstream on.
    4. Using the Techstream, enter the following menus: Powertrain / Radar Cruise / Trouble Code.
    5. Check the DTCs.
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the power switch ON (IG).
    3. Turn the Techstream on.
    4. Using the Techstream, enter the following menus: Powertrain / Radar Cruise / Trouble Code.
    5. Clear the DTCs.
scientia non olet · About Mike's Workshop Manuals