Problem Symptoms Table
NOTE:
The following inspection procedures of the rear view monitor system are described on the assumption that the navigation system is normal. If any navigation system DTC is output, first proceed with troubleshooting of the navigation system.
HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
REAR VIEW MONITOR SYSTEM
| Symptom | Suspected Area | See |
|---|---|---|
| When shift lever is in R position, rear view monitor image is not displayed (screen is not black) | Reverse signal circuit | Refer to Reverse Signal Circuit |
| Proceed to "Display signal circuit between multi-display and television camera assembly" | Refer to Display Signal Circuit between Multi-display and Television Camera Assembly | |
| Display and navigation module display (w/ Navigation System [for HDD]) | Refer to REMOVAL | |
| Display and navigation module display (w/ Navigation System [for DVD]) | Refer to REMOVAL | |
| Display and navigation module display (w/o Navigation System) | Refer to REMOVAL | |
| When shift lever is in R position, rear view monitor image is not displayed (screen is black) | Display and navigation module display power source circuit | Refer to Navigation ECU Power Source Circuit |
| Proceed to "Display signal circuit between multi-display and television camera assembly" | Refer to Display Signal Circuit between Multi-display and Television Camera Assembly | |
| Television camera assembly | Refer to REMOVAL | |
| Display and navigation module display (w/ Navigation System [for HDD]) | Refer to REMOVAL | |
| Display and navigation module display (w/ Navigation System [for DVD]) | Refer to REMOVAL | |
| Display and navigation module display (w/o Navigation System) | Refer to REMOVAL | |
| When shift lever is not in R position, rear view monitor image is displayed. | Proceed to "Display signal circuit between multi-display and television camera assembly" | Refer to Display Signal Circuit between Multi-display and Television Camera Assembly |
| Display and navigation module display (w/ Navigation System [for HDD]) | Refer to REMOVAL | |
| Display and navigation module display (w/ Navigation System [for DVD]) | Refer to REMOVAL | |
| Display and navigation module display (w/o Navigation System) | Refer to REMOVAL | |
| Problem with the rear view monitor image (color, distortion of picture). | Proceed to "Display signal circuit between multi-display and television camera assembly" | Refer to Display Signal Circuit between Multi-display and Television Camera Assembly |
| Display and navigation module display (w/ Navigation System [for HDD]) | Refer to REMOVAL | |
| Display and navigation module display (w/ Navigation System [for DVD]) | Refer to REMOVAL | |
| Display and navigation module display (w/o Navigation System) | Refer to REMOVAL | |
| Television camera assembly | Refer to REMOVAL |