Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2011 >> IS 350C >> Repair and Diagnosis >> External Pages >> Different car >> Section 307 (Engine Control System (Service Information)) >> Mass Air Flow Meter >> Installation >> Installation

Mass Air Flow Meter: Installation: Installation

WARNING: This page is about a different car, the 2011 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL MASS AIR FLOW METER 
    1. Install the MAF meter with the 2 screws.
      Fig 1: Identifying Mass Air Flow Meter Screws
      GTY148744Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 1.0 N*m (10 kgf*cm, 9 in.*lbf) 

      NOTE:

      Make sure that the O-ring is not pinched.

    2. Connect the MAF meter connector.
  2. INSTALL ENGINE ROOM SIDE COVER RH  . Refer to INSTALLATION - Step 92
  3. INSTALL COOL AIR INTAKE DUCT SEAL  . Refer to INSTALLATION - Step 94
  4. INSTALL V-BANK COVER SUB-ASSEMBLY  . Refer to INSTALLATION - Step 95
scientia non olet · About Mike's Workshop Manuals