Clutch Switch: Installation: Installation

INSTALL CLUTCH SWITCH ASSEMBLY
1. Fully loosen the lock nut of the clutch switch assembly.
2. Adjust the clutch switch until the threaded portion makes gentle contact with the cushion. Tighten the lock nut and verify the contact of the switch threaded portion with the cushion.
  
  Fig 1: Adjusting Clutch Switch Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 15.7 N.m (160 kgf cm, 12 ft. lbf)
3. Connect the connector.
INSTALL MAIN BODY ECU (COWL SIDE JUNCTION BLOCK LH)
1. Install the main body ECU (cowl side junction block LH) with the 2 nuts.
  
  Fig 2: Identifying Nuts & Main Body ECU (Cowl Side Junction Block LH)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 8.0 N.m (82 kgf cm, 71 in. lbf)
2. Connect all connectors.
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY . Refer to INSTALLATION - Step 25
INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY . Refer to INSTALLATION - Step 26
INSTALL SIDE INSTRUMENT PANEL LH . Refer to INSTALLATION - Step 27
INSTALL FRONT DOOR OPENING TRIM COVER LH . Refer to INSTALLATION - Step 28
INSTALL FRONT DOOR SCUFF PLATE LH . Refer to INSTALLATION - Step 88