Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2011 >> IS 250C Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 218 (Brake Control System (Service Information)) >> Yaw Rate And Acceleration Sensor >> Inspection >> Inspection

Yaw Rate And Acceleration Sensor: Inspection: Inspection

WARNING: This page is about a different car, the 2011 Lexus IS 350 and 2011 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT YAW RATE AND ACCELERATION SENSOR 
    1. Inspect the yaw rate and acceleration sensor. If any of the following occurs, replace the yaw rate and acceleration sensor with a new one.
      • The surface of the yaw rate and acceleration sensor is cracked, dented, or chipped off.
      • The connector or wire harness is scratched, cracked, or damaged.
      • The yaw rate and acceleration sensor has been dropped.
scientia non olet · About Mike's Workshop Manuals