Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2011 >> IS 250 Base, RWD, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Warning Systems >> Intuitive Parking Assist System (Diagnostics - Introduction) >> Intuitive Parking Assist System >> DTC Check/Clear >> DTC Check/Clear

DTC Check/Clear

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Read the DTCs by following the directions on the tester screen.

      HINT: 

      Refer to the tester operator's manual for further details.

  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Erase the DTCs by following the directions on the tester's screen.

      HINT: 

      Refer to the tester operator's manual for further details.

scientia non olet · About Mike's Workshop Manuals