Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2011 >> HS 250h >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt (Service Information) >> Child Restraint Seat Tether Anchor >> Installation >> Installation

Child Restraint Seat Tether Anchor: Installation: Installation

  1. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET 
    1. Install the child restraint seat tether anchor bracket with the bolt.

      Torque: 21 N*m (214 kgf*cm, 16 ft.*lbf) 

      HINT: 

      Use the same procedure for the other 2 child restraint seat tether anchor brackets.

  2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade)  See step  2
  3. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)  . Refer to INSTALLATION - Step 3
  4. INSTALL CENTER STOP LIGHT SET (w/o Rear Sunshade)  . Refer to INSTALLATION - Step 1
  5. INSTALL REAR SEAT SHOULDER BELT COVER  See step  5
  6. CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH  See step  6
  7. CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH  See step  8
  8. CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH  See step  9
  9. INSTALL REAR SEATBACK ASSEMBLY  . Refer to INSTALLATION - Step 1
  10. INSTALL REAR SEAT HEADREST ASSEMBLY LH  . Refer to INSTALLATION - Step 4
  11. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY  . Refer to INSTALLATION - Step 3
  12. INSTALL REAR SEAT HEADREST ASSEMBLY RH  . Refer to INSTALLATION - Step 2
  13. INSTALL REAR SEAT CUSHION LOCK HOOK  . Refer to INSTALLATION - Step 5
  14. INSTALL REAR SEAT CUSHION ASSEMBLY  . Refer to INSTALLATION - Step 6
scientia non olet · About Mike's Workshop Manuals