Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2011 >> HS 250h >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System (Diagnostics - Introduction) >> Cruise Control System >> Terminals Of Ecu >> Terminals Of Ecu

Terminals Of Ecu

  1. CHECK HYBRID VEHICLE CONTROL ECU 
    Fig 1: Identifying Hybrid Vehicle Control ECU Connector Terminal Identification
    GTY282380Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    A58-33 (TC) - C28-14 (E1) P - BR Terminal TC of DLC3 Power switch on (IG) 10 to 14 V
    A58-33 (TC) - C28-14 (E1) P - BR Terminal TC of DLC3 Terminals TC and CG of DLC3 connected Below 1 V
    A58-56 (STP) - C28-14 (E1) LG - BR Stop light signal Power switch on (IG), brake pedal depressed 10 to 14 V
    A58-56 (STP) - C28-14 (E1) LG - BR Stop light signal Power switch on (IG), brake pedal released Below 1 V
    A58-74 (CCS) - C28-14 (E1) W - BR Cruise control main switch circuit Power switch on (IG) 10 to 14 V
    A58-74 (CCS) - C28-14 (E1) W - BR Cruise control main switch circuit CANCEL switch ON 6.6 to 10.1 V
    A58-74 (CCS) - C28-14 (E1) W - BR Cruise control main switch circuit SET/COAST switch ON 4.5 to 7.1 V
    A58-74 (CCS) - C28-14 (E1) W - BR Cruise control main switch circuit RES/ACC switch ON 2.3 to 4.0 V
    A58-74 (CCS) - C28-14 (E1) W - BR Cruise control main switch circuit MAIN switch ON Below 1 V
    A58-55 (ST1-) - C28-14 (E1) GR - BR Stop light signal Power switch on (IG), brake pedal depressed Below 1 V
    A58-55 (ST1-) - C28-14 (E1) GR - BR Stop light signal Power switch on (IG), brake pedal released 10 to 14 V
    A58-21 (SPDI) - C28-14 (E1) L - BR Vehicle speed signal Approximately 20 km/h (12 mph) Pulse generation
    (See waveform 1)
    A58-85 (VSX1) - A58-101 (E2X1) L - G Shift position signal Power switch on (IG)
    Shift position D or B
    4.0 to 4.8 V
    A58-97 (VSX4) - C28-14 (E1) W - BR Shift position signal Power switch on (IG)
    Shift position D, R or N
    3.0 to 4.85 V
    A58-98 (VSX3) - A58-14 (E1) G - BR Shift position signal Power switch on (IG)
    Shift position D, R or N
    3.0 to 4.85 V
  2. Oscilloscope waveforms 

    HINT: 

    Oscilloscope waveform samples are provided here for information purposes. Noise and fluttering waveforms have been omitted.

    1. Waveform 1 (vehicle speed signal)
      Fig 2: Waveform Graph
      GTY191968Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Item Content
      Terminal SPDI - E1
      Equipment Setting 5 V/DIV., 20 ms./DIV.
      Condition Driving at approximately 20 km/h (12 mph) with power switch on (READY)

      HINT: 

      The higher the vehicle speed, the shorter the cycle.