Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2011 >> CT 200h >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Electric Converters and Controllers >> Hybrid Control System (Service Information) >> Hybrid Control System >> DTC P0AC0-817: Hybrid Battery Pack Current Sensor Circuit Range / Performance >> Confirmation Driving Pattern

Confirmation Driving Pattern

  1. Connect the Techstream to the DLC3.
  2. Turn the power switch on (IG) and turn the Techstream on.
  3. Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).
  4. Turn the power switch off.
  5. Turn the power switch on (READY) and turn the Techstream on.
  6. Perform the universal trip.
  7. Enter the following menus: Powertrain / HV / Trouble Codes.
  8. Check that permanent DTCs are cleared.

    HINT: 

    • If a permanent DTC is output, the system is malfunctioning.
    • If no permanent DTC is output, the system is normal.
scientia non olet · About Mike's Workshop Manuals