Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2010 >> SC 430 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control (Diagnostics - Introduction) >> Cruise Control System >> DTC Check / Clear >> DTC Check / Clear

DTC Check / Clear

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch ON..
    3. Turn the Techstream on.
    4. Enter the following menus:

      Powertrain / Cruise Control / Trouble Codes.

    5. Read the DTCs.
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch ON..
    3. Turn the Techstream on.
    4. Enter the following menus:

      Powertrain / Cruise Control / Trouble Codes.

    5. Clear the DTCs.
scientia non olet · About Mike's Workshop Manuals