Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2010 >> LS 460 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Cruise Control (Service Information)) >> Cruise Control Main Switch >> Removal >> Removal

Cruise Control Main Switch: Removal: Removal

WARNING: This page is about a different car, the 2010 Lexus GS 450h. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    WARNING:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE NO. 2 STEERING WHEEL COVER LOWER  . Refer to REMOVAL - Step 4
  3. REMOVE NO. 3 STEERING WHEEL COVER LOWER  . Refer to REMOVAL - Step 3
  4. REMOVE STEERING WHEEL PAD  . Refer to REMOVAL - Step 5
  5. REMOVE STEERING WHEEL ASSEMBLY  . Refer to REMOVAL - Step 8
  6. REMOVE CRUISE CONTROL MAIN SWITCH 
    1. Disconnect the connector.
      Fig 1: Locating Cruise Control Main Switch Connector And Screws
      GTY119991Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 screws and switch.
scientia non olet · About Mike's Workshop Manuals