Entry Lock And Unlock Switch: Inspection: Inspection
WARNING: This page is about a different car, the 2009 Lexus IS 350 and 2009 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT ENTRY LOCK AND UNLOCK SWITCH
- Remove the outside handle.
- Disconnect the connectors.
- Measure the resistance according to the value(s) in the table below.
Standard resistance
Tester Connection (Symbols) Condition Specified Condition o1-1 (TRG-) - o1-3 (TRG+) Lock switch not pushed 10 kΩ or higher Lock switch pushed Below 1 Ω n1-1 (TRG-) - n1-3 (TRG+) Lock switch not pushed 10 kΩ or higher Lock switch pushed Below 1 Ω