Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2010 >> IS 350C >> Repair and Diagnosis >> External Pages >> Different car >> Section 244 (Cruise Control (Diagnostics - Introduction)) >> Cruise Control System >> DTC Check / Clear >> DTC Check / Clear

DTC Check / Clear

WARNING: This page is about a different car, the 2009 Lexus IS 350 and 2009 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Cruise Control / Trouble Codes.
    5. Check the details of the DTC(s). Refer to DIAGNOSTIC TROUBLE CODE CHART .
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Cruise Control / Trouble Codes.
    5. Clear the DTCs.
scientia non olet · About Mike's Workshop Manuals