Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2009 >> RX 350 AWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control (SFI) System (Diagnostic Codes (P043E-P2A00) & Circuit Tests) >> SFI System >> DTC P0607: Control Module Performance >> Procedure

DTC P0607: Control Module Performance: Procedure

  1. CHECK WHETHER DTC OUTPUT RECURS (IN ADDITION TO DTC P0607) 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Clear the DTC.
    5. Turn the ignition switch off.
    6. Disconnect the battery negative terminal and wait for 1 minute.
    7. Connect the battery negative terminal.
    8. Turn the ignition switch to ON.
    9. Select the following menu items: Powertrain / Engine and ECT / Trouble Codes.
    10. Read the DTCs.

      Result

      Display (DTC output) Proceed to
      P0607 A
      No output DTC B

    B → CHECK FOR INTERMITTENT PROBLEMS 

    A → REPLACE ECM 

scientia non olet · About Mike's Workshop Manuals