Inspection Procedure
- INSPECT FUSE (A/C)
- Remove the A/C fuse from the passenger side junction block.
- Measure the resistance of the fuse.
Standard resistance
RESISTANCE REFERENCE CHARTTester Connection Condition Specified Condition A/C fuse Always Below 1 Ω NG: REPLACE FUSE
OK: Go to Next Step
- CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER - BATTERY)
- Disconnect the L76 air conditioning amplifier connector.
- Measure the voltage according to the value(s) in the table below.
Standard voltage
VOLTAGE REFERENCE CHARTTester Connection Condition Specified Condition L76-6 (+B1) - Body ground Always 11 to 14 V L76-7 (+B2) - Body ground Always 11 to 14 V Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
OK: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (See PROBLEM SYMPTOMS TABLE )