Inspection Procedure

HINT:

After the inspection is completed, clear the DTCs.

1. CHECK DISC 
   1. Check that the disc is not deformed or cracked.

      OK: 

      No deformation or cracks on the disc. 

      Fig 1: Checking Disc

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      NG: REPLACE DISC 

      OK: Go to Next Step 

2. DISC CLEANING 
   1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
      NOTE: Do not use a conventional record cleaner or antistatic preservative.
      Fig 2: Cleaning Disc Surface With Soft Dry Cloth

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. CLEAR DTC 
   1. Clear the DTC (see DTC CHECK/CLEAR  ).
4. RECHECK DTC 
   1. Recheck DTCs and check if the same trouble occurs again.

      OK: 

      Malfunction disappears. 

      NG: Go to step 5 

      OK: END 

5. REPLACE DISC WITH ANOTHER AND RECHECK 
   1. Replace the disc with a normal one.
   2. Clear the DTCs (see DTC CHECK/CLEAR  ).
   3. Recheck for DTCs and check if the same trouble occurs again.

      OK: 

      Malfunction disappears. 

      NG: REPLACE DISC PLAYER (See  REMOVAL   ) 

      OK: END