Inspection Procedure
HINT:
After the inspection is completed, clear the DTCs.
NOTE:
- This code may be output even if there is no malfunction.
- If this code is output frequently, replace the radio receiver (see REMOVAL ).
- CLEAR DTC
- Clear the DTCs (see DTC CHECK/CLEAR ).
- RECHECK DTC
- Recheck for DTCs and check if the same trouble code occurs again.
OK:
Malfunction disappears.
NG: REPLACE RADIO RECEIVER (See REMOVAL )
OK: END
- Recheck for DTCs and check if the same trouble code occurs again.