Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2009 >> IS 350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Intuitive Parking Assist System (Diagnostics - Introduction)) >> Intuitive Parking Assist System >> DTC Check / Clear >> DTC Check / Clear

DTC Check / Clear

WARNING: This page is about a different car, the 2009 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. DTC CHECK USING TECHSTREAM 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Trouble Codes.
    5. Check for DTCs.
  2. DTC CLEAR USING TECHSTREAM 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Trouble Codes.
    5. Clear the DTCs by pressing the YES button on the Techstream display.
scientia non olet · About Mike's Workshop Manuals