Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2008 >> SC 430 >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Engine Immobilizer) >> Engine Immobiliser System >> DTC Check / Clear

DTC Check / Clear

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 
    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the ignition switch ON.
    3. Read the DTCs by following the directions on the tester's screen.
  2. CLEAR DTC 
    1. Connect the intelligent tester (with CAN VIM) to the DLC3.
    2. Turn the ignition switch ON.
    3. Erase the DTCs by following the directions on the tester's screen.
      Fig 1: Connecting Cable Of Intelligent Tester (With CAN VIM) To DLC3
      G05292509Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals