Typical Malfunction Thresholds
- One of the following conditions is met: Condition (A), (B) and (C)
Condition (A)
Either of the following conditions (1) or (2) is met:
TYPICAL MALFUNCTION THRESHOLDS(1) Number of the following signal input at the same time 2 or more P switch ON R switch ON N switch ON D switch ON 3 switch*1 ON 2 switch*1 ON (2) Number of the following signal input at the same time 2 or more NSW switch ON R switch ON D switch ON 3 switch*1 ON 2 switch*1 ON Condition (B)
TYPICAL MALFUNCTION THRESHOLDSM switch (S position switch)*2 ON Condition (C)
Both of the following conditions (1) or (2) is met:
TYPICAL MALFUNCTION THRESHOLDS(1) One of the following conditions is met - NSW switch ON P switch ON R switch ON N switch ON (2) One of the following conditions is met - 4 shift position switch ON L shift position switch ON