Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2008 >> LS 460L >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - System & Circuit Troubleshooting, Component Inspection And R & I >> Camshaft Oil Control Valve >> On-Vehicle Inspection

On-Vehicle Inspection

  1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY 
    1. Connect the Techstream to the DLC3.
    2. Start the engine and turn the tester ON.
    3. Start and warm up the engine.
    4. Idle the engine.
    5. Enter the following menus: Powertrain / Engine / Active Test / Control the VVT Exhaust Linear (Bank 1) or Control the VVT Exhaust Linear (Bank 2)
    6. Check the engine speed while operating the Oil Control Valve (OCV) using the tester.

      Specified condition 

      TESTER OPERATION SPECIFIED CONDITION CHART

      Tester Operation Specified Condition
      0% Normal engine speed
      Soy- Engine idles roughly

      If the result is not as specified, check the oil control valve, wirings and camshaft timing exhaust gear.

      HINT:

      • VVT EX B1: Command to activate exhaust side oil control valve of bank 1.
      • VVT EX B2: Command to activate exhaust side oil control valve of bank 2.
scientia non olet · About Mike's Workshop Manuals