Inspection Procedure

CHECK FOR DTC (SFI SYSTEM)
1. Enter the following menus: Powertrain / Engine / Trouble Code.
2. Check for DTC.
OK: SFI system DTC is not output.

NG: GO TO SFI SYSTEM (See DIAGNOSTIC TROUBLE CODE TABLE )

OK: Go to Next Step
CHECK FOR DTC (AUTOMATIC TRANSMISSION SYSTEM)
1. Enter the following menus: Powertrain / ECT / Trouble Code.
2. Check for DTC.
OK: Electronic controlled automatic transmission system DTC is not output.

NG: GO TO AUTOMATIC TRANSMISSION SYSTEM (See DIAGNOSTIC TROUBLE CODE TABLE )

OK: REPLACE DRIVING SUPPORT ECU (See REMOVAL )