Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2008 >> IS F >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating / Air Conditioning System >> Room Temperature Sensor >> Installation

Room Temperature Sensor: Installation

  1. INSTALL ROOM TEMPERATURE SENSOR 
    1. Install the sensor with the claw
    2. Connect the connector and attach the air hose
      3. Fig 1: Locating Room Temperature Sensor
      G05755442Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY  (See INSTALLATION )
  3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY  (See INSTALLATION )
  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See INSTALLATION )
  5. INSTALL SIDE INSTRUMENT PANEL LH  (See INSTALLATION )
  6. INSTALL FRONT DOOR OPENING TRIM COVER LH  (See INSTALLATION )
  7. INSTALL FRONT DOOR SCUFF PLATE LH  (See INSTALLATION )
  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
  9. INSPECT SRS WARNING LIGHT 

    (See DIAGNOSIS SYSTEM )

scientia non olet · About Mike's Workshop Manuals