DTC P0724 Brake Switch "B" Circuit High: Description
The purpose of this circuit is to prevent the engine from stalling, while driving in lock-up condition, when brakes are suddenly applied
When the brake pedal is depressed, this switch sends a signal to the ECM Then the ECM cancels the operation of the lock-up clutch while braking is in progress
DTC DETECTION CONDITION CHART
| DTC No | DTC Detection Condition | Trouble Area |
|---|---|---|
| P0724 | The stop light switch remains ON even when the vehicle repeats 5 cycles of STOP (less than 1 86 mph [3 km/h]) and GO (18 65 mph [30 km/h] or more) (2 trip detection logic) |
|