Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2008 >> IS 250 AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning >> Blower Unit >> Reassembly

Blower Unit: Reassembly

  1. INSTALL COOLING UNIT WITH FAN MOTOR SUB-ASSEMBLY 
    1. Install the fan motor with the 3 screws.
      Fig 1: Locating Fan Motor Screws
      G05297904Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL CLEAN AIR FILTER 
    1. Attach the 2 claws to install the air filter.
      Fig 2: Identifying Air Filter Claws
      G05306997Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL INLET CONTROL SERVO MOTOR 
    1. Install the inlet control servo motor with the 2 screws.
      Fig 3: Locating Damper Servo Screws
      G05297902Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Attach the claw and install the lever.
      Fig 4: Identifying Inlet Control Servo Motor
      G05306995Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals