Typical Enabling Conditions
The stop light switch remains ON during GO and STOP 10 times.
GO and STOP are defined as follows;
TYPICAL ENABLING CONDITIONS
| The monitor will run whenever this DTC is not present | None |
| GO. (Vehicle speed is 18.63 mph (30 km/h) or more) | 18 7 mph (30 km/h) or more |
| STOP: (Vehicle speed is less than 1.86 mph (3 km/h)) | Less than 1.86 mph (3 km/h) |
| Starter | OFF |
| Battery voltage | 8 V or more |
| Engine switch | ON |