Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2007 >> RX 400h FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 823 (Cruise Control System (Diagnostics - Introduction)) >> Cruise Control System >> Road Test >> Road Test

Road Test

WARNING: This page is about a different car, the 2010 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT SET SWITCH 
      Fig 1: Pressing Cruise Control Main Switch ON
      GTY151410Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Push the main switch ON.
    2. Drive at a desired speed (40 km/h (25 mph) or higher).
      3. Fig 2: Pressing Control Switch To -/SET
      GTY246227Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Press the control switch to -/SET.
    4. After releasing the switch, check that the vehicle cruises at the desired speed.
  2. INSPECT "+" SWITCH 
      Fig 3: Pressing Cruise Control Main Switch ON
      GTY151410Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Push the main switch button ON.
    2. Drive at a desired speed (40 km/h (25 mph) or higher).
      3. Fig 4: Pressing Control Switch To -/SET
      GTY246227Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Press the control switch to -/SET.
    4. Check that the vehicle speed increases while the control switch is pressed to +/RES, and that the vehicle cruises at the set speed when the switch is released.
      5. Fig 5: Pressing Control Switch To +/RES
      GTY246226Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Momentarily press the control switch to +/RES and then immediately release it. Check that the vehicle speed increases by about 1.6 km/h (1 mph) (Tap-up function).
  3. INSPECT "-" SWITCH 
      Fig 6: Pressing Cruise Control Main Switch ON
      GTY151410Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Push the main switch button ON.
    2. Drive at a desired speed (40 km/h (25 mph) or higher).
      3. Fig 7: Pressing Control Switch To -/SET
      GTY246227Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Press the control switch to -/SET.
    4. Check that the vehicle speed decreases while the control switch is pressed to -/SET, and the vehicle cruises at the set speed when the switch is released.
    5. Momentarily press the control switch to -/SET, and then immediately release it. Check that the vehicle speed decreases by about 1.6 km/h (1 mph) (Tap-down function).
  4. INSPECT CANCEL SWITCH 
      Fig 8: Pressing Cruise Control Main Switch ON
      GTY151410Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Push the main switch button ON.
    2. Drive at a desired speed (40 km/h (25 mph) or higher).
      3. Fig 9: Pressing Control Switch To -/SET
      GTY246227Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Press the control switch to -/SET.
      4. Fig 10: Pulling Cruise Control Switch To CANCEL
      GTY218378Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. When operating one of the following, check that the cruise control system is canceled.
      • Depressing the brake pedal
      • Pushing the cruise control main switch OFF
      • Pulling the cruise control switch to CANCEL
      • The shift lever is moved from D or 4 to N, 3, 2 or 1. (for 2GR-FE)
      • The shift lever is moved from D or 3 to N, 2 or 1. (for 2AR-FE)
  5. INSPECT RES (RESUME) SWITCH 
      Fig 11: Pressing Cruise Control Main Switch ON
      GTY151410Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Push the main switch button ON.
    2. Drive at a desired speed (40 km/h (25 mph) or higher).
      3. Fig 12: Pressing Control Switch To -/SET
      GTY246227Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Press the control switch to -/SET.
      4. Fig 13: Pulling Cruise Control Switch To CANCEL
      GTY218378Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. When operating one of the following, check that the cruise control system is canceled.
      • Depressing the brake pedal
      • Pulling the cruise control switch to CANCEL
      • The shift lever is moved from D or 4 to N, 3, 2 or 1. (for 2GR-FE)
      • The shift lever is moved from D or 3 to N, 2 or 1. (for 2AR-FE)
      5. Fig 14: Pressing Control Switch To +/RES
      GTY246226Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. After the control switch is pressed to +/RES at a driving speed of more than 40 km/h (25 mph), check that the vehicle restores the speed before the cancellation.
scientia non olet · About Mike's Workshop Manuals