Diagnostic Trouble Code Chart
WARNING: This page is about a different car, the 2010 Toyota 4Runner. However, it is still accessible from the selected car via links, so may be relevant.
HINT:
If a trouble code is output during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the table below.
STEERING LOCK SYSTEM
| DTC Code | Detection Item | Trouble Area | Refer To |
|---|---|---|---|
| B2781 | Open / Short in Steering Lock ECU | - Steering lock actuator assembly (steering lock ECU) - LIN communication system - Harness or connector of LIN bus line |
Refer to DTC B2781: Open / Short in Steering Lock ECU |
| B2782 | Power Source Control ECU Malfunction | - Steering lock actuator assembly (steering lock ECU) - Power management control ECU - Harness or connector |
Refer to DTC B2782: Power Source Control ECU Malfunction |
| B2788 | IG2 Signal Malfunction | - IGN fuse - Steering lock actuator assembly (steering lock ECU) - Power management control ECU - Harness or connector |
Refer to DTC B2788: IG2 Signal Malfunction |