Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2007 >> RX 400h AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 337 (Engine Control System (1NZ-FE)) >> Engine Coolant Temperature Sensor >> Removal

Engine Coolant Temperature Sensor: Removal

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
  2. DRAIN ENGINE COOLANT  (See REPLACEMENT )
  3. REMOVE ENGINE COOLANT TEMPERATURE SENSOR 
    1. Disconnect the engine coolant temperature sensor connector.
      Fig 1: Identifying Engine Coolant Temperature Sensor Connector
      G04828395Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using SST, remove the engine coolant temperature sensor.

      SST 09817-33190 

      Fig 2: Identifying Engine Coolant Temperature Sensor
      G04828396Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals