Knock Sensor, Intake Manifold: Inspection
WARNING: This page is about a different car, the 2008 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT KNOCK SENSOR
- Measure the resistance of the sensor.
Standard resistance
RESISTANCE SPECIFICATION
| Tester Connection |
Specified Condition |
| 1 (Ground) - 2 (Output) |
120 to 280 kΩ at 20C (68°F) |
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
If the result is not as specified, replace the knock sensor.