Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2007 >> RX 400h AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Control System (3MZ-FE)) >> Camshaft Timing Oil Control Valve Assembly >> Installation

Camshaft Timing Oil Control Valve Assembly: Installation

WARNING: This page is about a different car, the 2006 Lexus RX 400h. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1) 
    1. Apply a coat of engine oil to an O-ring of the sensor.
    2. Install the camshaft timing oil control valve with the bolt.

      Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf) 

    3. Connect the camshaft timing oil control valve connector.
      Fig 1: Identifying Camshaft Timing Oil Control Valve Connector (For Bank 1)
      G04110855Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2) 
    1. Apply a coat of engine oil to an O-ring of the sensor.
    2. Install the camshaft timing oil control valve with the bolt.

      Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf) 

      Connect the camshaft timing oil control valve connector.

      Fig 2: Identifying Camshaft Timing Oil Control Valve Connector (For Bank 2)
      G04110856Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE AIR CLEANER CASE W/ RESONATOR (See  REMOVAL   ) 
  4. REMOVE AIR CLEANER CAP W/ INLET (See  REMOVAL   ) 
  5. REMOVE COOL AIR INTAKE DUCT SEAL (See  REMOVAL  ) 
  6. REMOVE ENGINE ROOM COVER SIDE (See  REMOVAL  ) 
  7. REMOVE ENGINE ROOM SIDE LH COVER (See  REMOVAL  ) 
scientia non olet · About Mike's Workshop Manuals