Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2007 >> LX 470 >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning >> Solar Sensor >> Removal

Solar Sensor: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

    HINT:

    At the time of installation, perform initialization (see INITIALIZATION ).

    NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
  2. REMOVE SOLAR SENSOR 
    1. Using a screwdriver, pull out the solar sensor, and then disconnect the connector.

      HINT:

      Tape the screwdriver tip before use.

scientia non olet · About Mike's Workshop Manuals