Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2007 >> LX 470 >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning >> Blower Unit >> Disassembly

Blower Unit: Disassembly

  1. REMOVE AIR INLET SERVO MOTOR 
    1. Remove the 3 screws and air inlet servo motor.
      Fig 1: Identifying Air Inlet Servo Motor Screws
      G05284270Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE BLOWER MOTOR CONTROL RELAY 
    1. Disconnect the connector.
    2. Remove the screw and blower motor control relay.
      Fig 2: Identifying Blower Motor Control Relay Screws
      G05284271Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE BLOWER MOTOR 
    1. Disconnect the connector.
    2. Remove the 3 screws and blower motor.
  4. REMOVE WIRE HARNESS 
    1. Remove the screw and wire harness.
scientia non olet · About Mike's Workshop Manuals