Radio not Operating when Power Switch Turned ON

HINT:

The term "AM" includes LW, MW and SW, and the term "FW" includes UKW.

1. CHECK CASSETTE TAPE PLAYER 
   1. Is tape player operating normally?

   OK: REPLACE RADIO RECEIVER ASSEMBLY 

   NG: Go to Next Step 

2. INSPECT FUSE (ACC, RADIO) 
   1. Remove the ACC fuse from the cowl side junction block LH.
   2. Remove the RADIO fuse from the cowl side junction block RH.
   3. Measure the resistance of the fuses.

   Standard resistance: 

   Below 1 Ω 

   NG: REPLACE FUSE 

   OK: Go To Next Step 

3. CHECK WIRE HARNESS (STEREO COMPONENT AMPLIFIER - BATTERY AND BODY GROUND) 

   NG: REPAIR OR REPLACE HARNESS AND CONNECTOR 

   OK: Go To Next Step 

4. CHECK WIRE HARNESS (RADIO RECEIVER ASSEMBLY - BATTERY AND BODY GROUND) 

   NG: REPAIR OR REPLACE HARNESS AND CONNECTOR 

   OK: REPLACE RADIO RECEIVER ASSEMBLY