DTC Confirmation Procedure
WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Always drive vehicle at a safe speed.
NOTE:
If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
TESTING CONDITION:
Step 3 may be conducted with the drive wheels lifted in the shop or by driving the vehicle. If a road test is expected to be easier, it is unnecessary to lift the vehicle .
WITH CONSULT-II
- Start engine (TCS switch or VDC switch OFF).
- Select "DATA MONITOR" mode with CONSULT-II.
- Drive the vehicle at more than 40 km/h (25 MPH).
- If DTC is detected, go to "DIAGNOSTIC PROCEDURE ."
WITH GST
Follow the procedure "WITH CONSULT-II" above.