Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> External Pages >> Different car >> Section 644 (Glass & Window System) >> On-Vehicle Repair >> Front Door Glass >> Inspection and Adjustment >> System Initialization >> Initialization

System Initialization: Initialization

WARNING: This page is about a different car, the 2009 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

After installing each component to the vehicle, follow the steps below.

  1. Disconnect the negative battery terminal or disconnect the power window switch harness connector temporarily, then reconnect after at least 1 minute.
  2. Turn ignition switch ON.
  3. Open the window fully by operating the power window switch. (Exclude this procedure if the window is already fully opened.)
  4. Fully raise the power window switch in up direction (auto close position) and hold. Keep holding the switch even when window is completely closed and then release after 3 seconds have passed.
  5. Inspect the anti-pinch system function.
NOTE: Initialization may be cancelled with continuous opening and closing operation. In this case, initialize the system.
scientia non olet · About Mike's Workshop Manuals