Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> External Pages >> Different car >> Section 516 (Driver Information System) >> Unified Meter And A/C Amp >> CONSULT-II Function (METER A/C AMP) >> Data Monitor >> Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2007 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.
  2. Touch either "MAIN SIGNALS" or "SELECTION FROM MENU" on the "DATA MONITOR" screen.
    DATA MONITOR

    MAIN SIGNALS Monitors main signals.
    SELECTION FROM MENU Selects and monitors individual signal.
  3. Touch "START".
  4. When "SELECTION FROM MENU" is selected, touch individual items to be monitored. When "MAIN SIGNALS" is selected, main items will be monitored.
    Fig 1: CONSULT-II Display DATA MONITOR
    G04908697Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Touch "RECORD" while monitoring, then the status of the monitored item can be recorded. To stop recording, touch "STOP".
scientia non olet · About Mike's Workshop Manuals